Natural Resources Canada

This layer comprises all the available water wells in GIN (Yukon, British Columbia, Alberta, Saskatchewan, Manitoba, Ontario, Quebec, Nova Scotia and Newfoundland and Labrador) and published through the open data platforms. This layer is a combination of all individual provincial and territorial...

This national map of flood susceptibility or flood prone areas is based on patterns of historic flood events as predicted by an ensemble machine learning model. The recommended use is national, provincial or regional scale and can be used as a guide for identifying areas for further...

Ottawa planning scenario using the 2010 Val-de-bois, QC earthquake hypocentre and fault plane geometry from Ma & Motazedian, 2012 and Atkinson & Assatourians, 2010. This scenario uses a larger magnitude event than those that have been observed to date for that location, within bounds of...

In 2015, a magnitude 4.7 earthquake occurred 60 km beneath Sidney, BC. This scenario visualizes the effects of that event if it had a magnitude of 7.1.

In September 1732 a damaging earthquake occurred immediately beneath the Island of Montréal. This scenario visualizes the effects of that event if it occurred today with a magnitude of 5.0, and represents a strong ground shaking event that could strike Montréal.

Faults in the valleys near Ottawa could rupture and produce strong, shallow earthquakes. This magnitude 5.5 scenario visualizes the effects of such an event. It does not represent the most severe earthquake that could occur, but one that is more likely and could still cause damage.

In 1997, a magnitude 4.6 earthquake occurred 3 to 4 km beneath the Strait of Georgia. This scenario visualizes the effects of that event if it had a magnitude of 7.0, and represents a strong ground shaking event that could strike Metro Vancouver.

Full rupture of the Cascadia interface fault, the fault defining the boundary between the North American and Pacific Ocean plates. This magnitude 9.0 event, often referred to as ‘The Big One’, affects most communities in southwestern British Columbia.

The Denali Fault spans over 200km of the Yukon Territory, and is a significant source of seismic hazard. This magnitude 7.4 earthquake scenario, centered near small communities along the Alaska Highway, visualizes the effects of a severe earthquake that could be produced by this fault.

In 1997, a magnitude 4.6 earthquake occurred 3 to 4 km beneath the Strait of Georgia, near Vancouver. This scenario visualizes the effects of that event if it occurred today with a magnitude of 4.9. A magnitude 7.0 Georgia Strait scenario is also provided, and represents a less likely but more...

Full rupture of the Leech River Fault, a fault that cuts southern Vancouver Island and extends beneath Greater Victoria. Based on current science, this magnitude 7.3 earthquake scenario represents the strongest ground shaking event that could strike the region, and is one of Greater Victoria’s...

The Probabilistic Seismic Risk Model for Canada introduces a structured framework of indicators that profile the physical, social and economic dimensions of earthquake risk at the neighborhood scale. Risk metrics include measures of building damage and collapse probability, life safety and...

Land cover information is necessary for a large range of environmental applications related to climate impacts and adaption, emergency response, wildlife habitat, etc. In Canada, a 2008 user survey indicated that the most practical land cover data is provided in a nationwide 30 m spatial...

This collection is a legacy product that is no longer supported. It may not meet current government standards. The Canadian Digital Elevation Model (CDEM) is part of Natural Resources Canada's altimetry system designed to better meet the users' needs for elevation data and products. The CDEM...

This is a legacy product that is no longer supported. It may not meet current government standards. The Canadian Digital Surface Model (CDSM) is part of Natural Resources Canada's altimetry system designed to better meet the users' needs for elevation data and products. The 0.75-second (~20 m)...

Data represents surface water occurrence frequency (percentage), which describes the frequency for each grid appeared as water in the 30 years time period of 1991 to 2020. The data covers Canada’s entire landmass including all transboundary watersheds, and is at 30-meter spatial resolution. The...

The transport features of the CanVec series are derived from the National Road Network (NRN) and the National Railway Network (NRWN). The dataset describes roads, trails, bridges, railroads and their related information. The transport features include nautical facilities, track segments, track...

The land features of the CanVec series contains landscape features of Canada such as islands, shoreline delineation, wooded areas, saturated soil features, landform features (esker, sand, etc.). The CanVec multiscale series is available as prepackaged downloadable files and by user-defined...

The hydrographic features of the CanVec series include watercourses, water linear flow segments, hydrographic obstacles (falls, rapids, etc.), waterbodies (lakes, watercourses, etc.), permanent snow and ice features, water wells and springs. The Hydrographic features theme provides quality...

The toponymic features of the CanVec series include proper nouns designating places and representations of the territory. This data come from provincial, territorial and Canadian toponymic databases. They are used in the CanVec Series for cartographic reference purposes and vary according to the...