Natural Resources Canada

Ottawa planning scenario using the 2010 Val-de-bois, QC earthquake hypocentre and fault plane geometry from Ma & Motazedian, 2012 and Atkinson & Assatourians, 2010. This scenario uses a larger magnitude event than those that have been observed to date for that location, within bounds of...

In 2015, a magnitude 4.7 earthquake occurred 60 km beneath Sidney, BC. This scenario visualizes the effects of that event if it had a magnitude of 7.1.

In September 1732 a damaging earthquake occurred immediately beneath the Island of Montréal. This scenario visualizes the effects of that event if it occurred today with a magnitude of 5.0, and represents a strong ground shaking event that could strike Montréal.

Faults in the valleys near Ottawa could rupture and produce strong, shallow earthquakes. This magnitude 5.5 scenario visualizes the effects of such an event. It does not represent the most severe earthquake that could occur, but one that is more likely and could still cause damage.

In 1997, a magnitude 4.6 earthquake occurred 3 to 4 km beneath the Strait of Georgia. This scenario visualizes the effects of that event if it had a magnitude of 7.0, and represents a strong ground shaking event that could strike Metro Vancouver.

Full rupture of the Cascadia interface fault, the fault defining the boundary between the North American and Pacific Ocean plates. This magnitude 9.0 event, often referred to as ‘The Big One’, affects most communities in southwestern British Columbia.

The Denali Fault spans over 200km of the Yukon Territory, and is a significant source of seismic hazard. This magnitude 7.4 earthquake scenario, centered near small communities along the Alaska Highway, visualizes the effects of a severe earthquake that could be produced by this fault.

In 1997, a magnitude 4.6 earthquake occurred 3 to 4 km beneath the Strait of Georgia, near Vancouver. This scenario visualizes the effects of that event if it occurred today with a magnitude of 4.9. A magnitude 7.0 Georgia Strait scenario is also provided, and represents a less likely but more...

Full rupture of the Leech River Fault, a fault that cuts southern Vancouver Island and extends beneath Greater Victoria. Based on current science, this magnitude 7.3 earthquake scenario represents the strongest ground shaking event that could strike the region, and is one of Greater Victoria’s...

This collection is a legacy product that is no longer supported. It may not meet current government standards. The Canadian Digital Elevation Model (CDEM) is part of Natural Resources Canada's altimetry system designed to better meet the users' needs for elevation data and products. The CDEM...

This is a legacy product that is no longer supported. It may not meet current government standards. The Canadian Digital Surface Model (CDSM) is part of Natural Resources Canada's altimetry system designed to better meet the users' needs for elevation data and products. The 0.75-second (~20 m)...

The administrative features of the CanVec series include geopolitical regions (international, territorial and provincial) and populated place names. A wide selection of attributes describe the data. The CanVec multiscale series is available as prepackaged downloadable files and by...

The National Earthquake Scenario Catalogue, presents the probable shaking, damage, loss and consequences from hypothetical earthquakes that could impact Canadians. It considers only damage to buildings, and their inhabitants, from earthquake shaking, and therefore does not include damage to...

The Moderate Resolution Imaging Spectroradiometer (MODIS ) is one of the most sophisticated sensors that is used in a wide range of applications related to land, ocean and atmosphere. It has 36 spectral channels with spatial resolution varying between 250 m and 1 km at nadir. MODIS channels 1...

The MODIS surface albedo dataset was produced by the Canada Center for Remote Sensing (CCRS), Natural Resources Canada. The dataset represents the solar shortwave broadband surface albedo and it is at a 10-day interval covering the entire Canadian landmass as well as northern USA, Alaska, and the...

The Government of Canada acquired a national image coverage from the Systeme Pour l'Observation de la Terre (SPOT 4 - 5) satellites that includes four multispectral bands in the visible to shortwave infrared region at 20m spatial resolution. Five years from 2005 - 2010 were necessary to image all...

The Canadian long term satellite data record (LTDR) derived from 1-km resolution Advanced Very High Resolution Radiometer (AVHRR) data was produced by the Canada Center for Remote Sensing (CCRS). Processing included: geolocation, calibration, and compositing using Earth Observation Data Manager...

Landsat Thematic Mapper (TM) and Enhanced Thematic Mapper (ETM+) sensors were used to generate the circa 2010 Mosaic of Canada at 30 m spatial resolution. All scenes were processed to Standard Terrain Correction Level 1T by the United States Geological Survey (USGS). Further processing performed...

This release makes available the West Canadian Coast part of the results of an ongoing effort to scan and convert all our inventory of analog marine survey field records (seismic, sidescan and sounder) to digital format. These records have been scanned at 300 dpi and were converted into JPEG2000...

This group of maps, which includes the CanMatrix and CanTopo collections, is now a legacy product that is no longer maintained. It may not meet current government standards. Natural Resources Canada's (NRCan) topographic raster maps provide a representation of the topographic phenomena of the...