Government of Ontario

A "contaminant attenuation zone" is a three-dimensional zone that is, * located on land adjacent to a landfilling site, * in the subservice or extends into the subsurface, and * is used or is intended to be used for the attenuation of contaminants from the landfilling site to levels that will not...

Fish Culture Operation MNR identifies the locations of the Ontario Ministry of Natural Resources (MNR) fish culture stations (or hatcheries) and sub- stations. The data set outlines their property boundaries. This product requires the use of GIS software.

This information is used  to manage oil and gas rights on offshore Crown lands in Ontario. A grid system of blocks and tracts is used to divide the area. 1 block =  5 minute longitude by 5 minute latitude numbered area. 1 tract =  1 minute longitude by 1 minute latitude area, assigned by letters...

This dataset represents the locations of licenced and permitted pits and quarries regulated by the Ministry of Natural Resources and Forestry under the Aggregate Resources Act, R.S.O. 1990. Aggregate site data has been divided into active and inactive sites. Active sites may be further subdivided...

The dataset identifies the location and types of ANSIs that are commonly used in maps for resource management purposes. Official LIO title: ANSI [ANSIs]: Areas of Natural and Scientific Interest [ANSI]: Areas of Natural and Scientific Interest

To identify the Greenbelt Area as defined by the Greenbelt Act, 2005. The outer boundaries of Greenbelt area includes the lands within: * Niagara Escarpment Plan * Oak Ridges Moraine Conservation Plan * Lands designated as Protected Countryside * Lands designated as Urban River Valley

A feature is a representation of a real world object, such as a lake, stream, dam or rapid. There are three hydrographic feature classes:  points, lines and polys. All may impede or be hazardous to waterflow and/or navigation on a watercourse or waterbody. This data shows natural and manmade...

A feature is a representation of a real world object, such as a lake, stream, dam or rapid. There are three hydrographic feature classes:  points, lines and polys.   All may impede or be hazardous to waterflow and/or navigation on a watercourse or waterbody. This data shows natural and manmade...