CMI Water Quality Sampling Sites

CMI Water Quality Sampling Sites The Fish Habitat Management System for Yukon Placer Mining replaced the Yukon Place Authorization (YPA) in 15 Yukon watersheds on April 11, 2008. Founded on principles of adaptive management and incorporating a risk-based approach to decision-making, the system is intended to balance the objectives of a sustainable Yukon placer mining industry with the conservation and protection of fish and fish habitat supporting fisheries Adaptive management recognizes that the effectiveness of any management system is hampered by a degree of uncertainty and lack of knowledge. It seeks to improve the system by monitoring the effects of management actions, in order to learn from the results. The Adaptive Management Framework for Yukon placer mining is complemented by traditional knowledge and water quality objectives monitoring, aquatic health monitoring and economic health monitoring programs. The results should provide new information and a rational basis for making any adjustments required to achieve the two management objectives. The water quality objectives monitoring program is governed by the Water Quality Objectives Monitoring Protocol. The Protocol describes the locations, timing, frequency and methods employed during sampling, as well as the methods used to analyze sampling data. Precipitation data was collected from a variety of sources to assist in the interpretation of results. The water quality objectives monitoring program relies upon both continuous sampling and grab sampling. Continuous sampling is performed by automated instruments that pump water from the creek or river at a preset volume and at precise times each day. Grab samples are taken by personnel at a selected location, depth and time. Normally the quantity of water taken is sufficient for all the physical and chemical analyses that will be done on the sample. Grab sampling is also performed during sampling "blitzes", when single grab samples are collected from as many sites as possible within a short timeframe in order to get a snapshot of the water quality in a watershed over a 24 hour period. Distributed from GeoYukon by the Government of Yukon . Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: geomatics.help@yukon.ca 2024-09-26 Government of Yukon geomatics.help@yukon.ca Form DescriptorsNature and EnvironmentScience and Technologywater qualityenvironmental monitoringplaceryukongeoyukonGovernment information CMI Water Quality Sampling SitesHTML https://yukon.maps.arcgis.com/home/item.html?id=682d535bf46d4d50937426d80141c65b Original metadata (https://open.yukon.ca)HTML https://open.yukon.ca/data/datasets/cmi-water-quality-sampling-sites CMI Water Quality Sampling SitesXML https://yukon.maps.arcgis.com/sharing/rest/content/items/682d535bf46d4d50937426d80141c65b/info/metadata/metadata.xml?format=default&output=html CMI Water Quality Sampling Sitesother https://map-data.service.yukon.ca/GeoYukon/Environmental_Monitoring/CMI_Water_Quality_Sampling_Sites/

The Fish Habitat Management System for Yukon Placer Mining replaced the Yukon Place Authorization (YPA) in 15 Yukon watersheds on April 11, 2008. Founded on principles of adaptive management and incorporating a risk-based approach to decision-making, the system is intended to balance the objectives of a sustainable Yukon placer mining industry with the conservation and protection of fish and fish habitat supporting fisheries Adaptive management recognizes that the effectiveness of any management system is hampered by a degree of uncertainty and lack of knowledge. It seeks to improve the system by monitoring the effects of management actions, in order to learn from the results. The Adaptive Management Framework for Yukon placer mining is complemented by traditional knowledge and water quality objectives monitoring, aquatic health monitoring and economic health monitoring programs. The results should provide new information and a rational basis for making any adjustments required to achieve the two management objectives. The water quality objectives monitoring program is governed by the Water Quality Objectives Monitoring Protocol. The Protocol describes the locations, timing, frequency and methods employed during sampling, as well as the methods used to analyze sampling data. Precipitation data was collected from a variety of sources to assist in the interpretation of results. The water quality objectives monitoring program relies upon both continuous sampling and grab sampling. Continuous sampling is performed by automated instruments that pump water from the creek or river at a preset volume and at precise times each day. Grab samples are taken by personnel at a selected location, depth and time. Normally the quantity of water taken is sufficient for all the physical and chemical analyses that will be done on the sample. Grab sampling is also performed during sampling "blitzes", when single grab samples are collected from as many sites as possible within a short timeframe in order to get a snapshot of the water quality in a watershed over a 24 hour period. Distributed from GeoYukon by the Government of Yukon . Discover more digital map data and interactive maps from Yukon's digital map data collection. For more information: geomatics.help@yukon.ca

Data and Resources

Contact Information

Electronic Mail Address: geomatics.help@yukon.ca

Similar records