Natural Resources Canada

The dataset contains the digital boundaries for significant discovery licences, production licences, drilled wells, major pipelines and the jurisdictional boundary of the area administered by the Canada-Nova Scotia Offshore Petroleum Board (CNSOPB), as well as the inactive Georges Bank permits...

The Marine Geoscience for Marine Spatial Planning (MGMSP) program, implemented by Natural Resources Canada (NRCan), is an initiative with the goal of offering innovative regional geoscience products to support the Department of Fisheries and Oceans (DFO) in their Marine Spatial Planning...

GIS compilation of data used to perform the stacked cumulative chance of success (resource potential map) in Open file 9163. Natural Resources Canada (NRCan) has been tasked, under the Marine Conservation Targets (MCT) initiative announced in Budget 2016, with evaluating the petroleum resource...

The Bedrock Index provides a spatial record of the location of all Bedrock maps published by the Geological Survey of Canada and hosted on Geoscan. The index has three "series" of maps; CGM, A series, and preliminary maps. In cases where there have been multiple editions of a map, the most recent...

Flood extent polygons and their footprints representing floods from previous years throughout Canada as monitored by Natural Resources Canada using satellite imagery for emergency response. In response to large flood events, Natural Resources Canada (NRCan), for the provision of emergency...

Building on the initial effort (“Database of Open Water Areas in River Ice for Provinces of Manitoba, Ontario, Quebec, and the Maritimes - Potential Locations For River Hydrokinetic Energy Extraction Identified Through Optical Satellite Imager”; weblink:...

Locations of open water within river ice in Manitoba, Ontario, Quebec, and the Maritimes were discerned manually using publicly accessible optical satellite images spanning from 2013 to 2020. This initial effort has led to a dataset pinpointing potential sites for river hydrokinetic energy...

This dataset uses RADARSAT Constellation Mission (RCM) Synthetic Aperture Radar (SAR) satellite images to identify open water regions within ice-covered rivers during winter, with the aim to assess hydrokinetic resources near remote communities reliant on diesel fuel for electricity generation....

Representation of the causes of flooding events in the form of multiple points. The point groupings correspond to the set of locations that were affected by the same event. The inventory of past flooding events was compiled from various public sources and standardized into a common data model....

This entry provides access to surficial geology maps that have been published by the Geological survey of Canada. Two series of maps are available: "A Series" maps, published from 1909 to 2010 and "Canadian Geoscience Maps", published since 2010. Three types of CGM-series maps are available:...

This web mapping application gives estimates of the electricity that can be generated by grid-connected photovoltaic systems without batteries (in kWh/kWp) and of the mean daily global insolation (in MJ/m2 and in kWh/m2) for any location in Canada on a 60 arc seconds ~2 km grid. They are...

The Canada Flood Map inventory shows areas in Canada where a copy of a flood hazard map has been collected by Natural Resources Canada (NRCan). The inventory does not display flood zones or extents, but provides information on how to access these flood hazard maps. Depending on the license and...

The transport features of the CanVec series are derived from the National Road Network (NRN) and the National Railway Network (NRWN). The dataset describes roads, trails, bridges, railroads and their related information. The transport features include nautical facilities, track segments, track...

The land features of the CanVec series contains landscape features of Canada such as islands, shoreline delineation, wooded areas, saturated soil features, landform features (esker, sand, etc.). The CanVec multiscale series is available as prepackaged downloadable files and by user-defined...

The hydrographic features of the CanVec series include watercourses, water linear flow segments, hydrographic obstacles (falls, rapids, etc.), waterbodies (lakes, watercourses, etc.), permanent snow and ice features, water wells and springs. The Hydrographic features theme provides quality...

The elevation features of the CanVec series include the elevation contours and elevation points. These entities are used to describe the relief of the Canadian Landmass. The CanVec multiscale series is available as prepackaged downloadable files and by user-defined extent via a Geospatial data...

The resource management features of the CanVec series include power lines, communication lines, pipelines, valves, petroleum wells, wind-operated devices, transformer stations, ore extraction sites, aggregate extraction sites, peat extraction sites and oil and gas sites. The CanVec multiscale...

The manmade features of the CanVec series include dams, protection structures (breakwater, dike/levees), liquid storage facilities (basin, swimming pool, etc.), tanks, buildings, delimiting structures (fence, walls, etc.), landmark features (cross, radar, crane, forts, etc.), chimneys, towers,...

CanVec contains more than 60 topographic features classes organized into 8 themes: Transport Features, Administrative Features, Hydro Features, Land Features, Manmade Features, Elevation Features, Resource Management Features and Toponymic Features. This multiscale product originates from the...

The marks left in the seabed by the commercial anchoring process can be seen as linear features in high-resolution multibeam bathymetry data. These features have been digitized to polylines for individual marks and polygons for anchor scour zones for British Columbia's (BC) commercial anchorages....