Natural Resources Canada

The Canada Centre for Mapping and Earth Observation (CCMEO) has created a 30m resolution radar mosaic of Canada's landmass from the RADARSAT Constellation Mission (RCM). This product highlights different types of radar interaction with the surface, which can assist the interpretation and study...

To support improved groundwater geoscience knowledge for southern Ontario, a regional 3-D model of the surficial geology of southern Ontario has been developed as a part of a collaboration between the Ontario Geological Survey and the Geological Survey of Canada. Covering approximately 66,870...

In replacement of the former Canadian Digital Elevation Model (CDEM) that is no longer supported, the Medium Resolution Digital Elevation Model (MRDEM) product is a multi-source product that integrates elevation data from the Copernicus DEM** acquired during the TanDEM-X Mission (AIRBUS, 2022),...

The Zero Emission Vehicle Infrastructure Program (ZEVIP) aims at addressing the lack of charging infrastructure in Canada, one of the key barriers to zero emission vehicle adoption by increasing the availability of localized charging where Canadians live, work, travel and play. This EV...

The Marine Geoscience for Marine Spatial Planning (MGMSP) program, implemented by Natural Resources Canada (NRCan), is an initiative with the goal of offering innovative regional geoscience products to support the Department of Fisheries and Oceans (DFO) in their Marine Spatial Planning...

GIS compilation of data used to perform the stacked cumulative chance of success (resource potential map) in Open file 9163. Natural Resources Canada (NRCan) has been tasked, under the Marine Conservation Targets (MCT) initiative announced in Budget 2016, with evaluating the petroleum resource...

The High Resolution Digital Elevation Model Mosaic provides a unique and continuous representation of the high resolution elevation data available across the country. The High Resolution Digital Elevation Model (HRDEM) product used is derived from airborne LiDAR data (mainly in the south) and...

In 1997, a magnitude 4.6 earthquake occurred 3 to 4 km beneath the Strait of Georgia, near Vancouver. This scenario visualizes the effects of that event if it occurred today with a magnitude of 5.0. A magnitude 7.0 Georgia Strait scenario is also provided, and represents a less likely but more...

A magnitude 5 earthquake scenario along an unnamed fault located about 15 km north-northeast of Burnaby City Hall and directly south of Mt Elsay. This fault is not known to be active, but this scenario represents a small but damaging event in the North Shore Mountains.

A magnitude 5.9 earthquake near Montreal, along the Milles-Îles Fault. This fault is not known to be active, but this scenario represents a small but damaging event near the City of Montreal.

A magnitude 5.6 rupture scenario near Ottawa along the Gloucester Fault in the south of the city. This fault is not known to be active, but this scenario is representative of seismicity in the Ottawa Valley.

This is a magnitude 5.0 earthquake scenario along the Burlington Toronto Structural Zone — a fault near Toronto and its surrounding region. This fault is not known to be active but demonstrates a plausible earthquake scenario for the Toronto region.

The Beaufort fault in Eastern Vancouver Island is probably an active fault, near Courtenay/Comox/Cumberland. Based on current science, this fault may have ruptured in the 1946 magnitude 7.3 Vancouver Island Earthquake. This scenario represents a smaller magnitude 5.2 event.

In 1949 a magnitude 8.1 earthquake occurred on the Queen Charlotte Fault, off the west coast of the Haida Gwaii archipelago. This magnitude 8.0 scenario along the Queen Charlotte Fault is slightly different and closer to population centres than the magnitude 7.8 earthquake that occurred in 2012.

Magnitude 5.5 earthquake scenario located directly southeast of Ladysmith Town Centre. This fault is not known to be active, but this scenario represents a small but damaging event near Ladysmith and Burleith Arm.

In 1949 a magnitude 8.1 earthquake occurred on the Queen Charlotte Fault, off the west coast of the Haida Gwaii archipelago. This magnitude 7.7 scenario along the Queen Charlotte Fault is slightly different and closer to population centres than the magnitude 7.8 earthquake that occurred in 2012.

The Bedrock Index provides a spatial record of the location of all Bedrock maps published by the Geological Survey of Canada and hosted on Geoscan. The index has three "series" of maps; CGM, A series, and preliminary maps. In cases where there have been multiple editions of a map, the most recent...

Flood extent polygons and their footprints representing floods from previous years throughout Canada as monitored by Natural Resources Canada using satellite imagery for emergency response. In response to large flood events, Natural Resources Canada (NRCan), for the provision of emergency...

Land cover information is necessary for a large range of environmental applications related to climate impacts and adaption, emergency response, wildlife habitat, etc. In Canada, a 2008 user survey indicated that the most practical land cover data is provided in a nationwide 30 m spatial...

Building on the initial effort (“Database of Open Water Areas in River Ice for Provinces of Manitoba, Ontario, Quebec, and the Maritimes - Potential Locations For River Hydrokinetic Energy Extraction Identified Through Optical Satellite Imager”; weblink:...