Government of Ontario

Get the locations of dairy plants registered by the Ontario Ministry of Agriculture, Food and Rural Affairs.  The intended use of this data is to assist the public and ministry staff to locate licenced dairy plants.

Often these parcels were surveyed before township surveys in their area. They may also be supplemental to them (as is the case with some Cadastral Islands). Sometimes these were laid out after a township survey was done, so some may be part of a geographic township. Cadastral Location includes...

Fish Culture Operation MNR identifies the locations of the Ontario Ministry of Natural Resources (MNR) fish culture stations (or hatcheries) and sub- stations. The data set outlines their property boundaries. This product requires the use of GIS software.

The data is used to create reference and thematic maps The Special Needs Strategy was launched in February 2014 to improve services for children and youth with special needs and their families. Its three key areas include: * identifying kids' needs earlier and connecting them to the right help...

Geographic Information System (GIS) data with the following mapping layers from the Greenbelt Plan: * outer boundaries * protected countryside and urban river valley designations * specialty crop areas (Niagara tender fruit, grape area and Holland Marsh) * settlement areas (towns, villages and...

Hamlets are smaller settlement areas identified in municipal official plans, generally without municipal water and sewer servicing. For precise boundaries and locations of hamlets, the appropriate municipality should be consulted.

Ontario's Healthy Babies Healthy Children program helps infants and children up to age 6 and their families through: * risk screening and assessments * referrals to community programs and services * supports for new parents These shapefiles provide geospatial data for mapping the 34 Healthy...

This information is used  to manage oil and gas rights on offshore Crown lands in Ontario. A grid system of blocks and tracts is used to divide the area. 1 block =  5 minute longitude by 5 minute latitude numbered area. 1 tract =  1 minute longitude by 1 minute latitude area, assigned by letters...

This dataset represents the locations of licenced and permitted pits and quarries regulated by the Ministry of Natural Resources and Forestry under the Aggregate Resources Act, R.S.O. 1990. Aggregate site data has been divided into active and inactive sites. Active sites may be further subdivided...

The dataset identifies the location and types of ANSIs that are commonly used in maps for resource management purposes. Official LIO title: ANSI [ANSIs]: Areas of Natural and Scientific Interest [ANSI]: Areas of Natural and Scientific Interest

To identify the Greenbelt Area as defined by the Greenbelt Act, 2005. The outer boundaries of Greenbelt area includes the lands within: * Niagara Escarpment Plan * Oak Ridges Moraine Conservation Plan * Lands designated as Protected Countryside * Lands designated as Urban River Valley

The Ministry of Natural Resources and Forestry defines ecological units on the basis of bedrock, climate (temperature, precipitation), physiography(soils, slope, aspect) and corresponding vegetation. This enhances their compatibility with national and continental classification systems. The ELC...

Minor urban center is one of the 7 Niagara Escarpment Plan land use designations. This designation includes rural settlements, villages and hamlets. The boundaries of minor urban centres are defined by the municipality in an approved official plan and/or secondary plan. More information

Depicts the internal boundaries of the Niagara Escarpment Plan area. The 7 land use designations are: * escarpment natural area * escarpment protection area * escarpment rural area * minor urban centre * urban area * escarpment recreation area * mineral resource extraction area The land use...

A feature is a representation of a real world object, such as a lake, stream, dam or rapid. There are three hydrographic feature classes:  points, lines and polys. All may impede or be hazardous to waterflow and/or navigation on a watercourse or waterbody. This data shows natural and manmade...

A feature is a representation of a real world object, such as a lake, stream, dam or rapid. There are three hydrographic feature classes:  points, lines and polys.   All may impede or be hazardous to waterflow and/or navigation on a watercourse or waterbody. This data shows natural and manmade...

There are 21 ministry-funded Children's Treatment Centres across Ontario. These centres provide rehabilitation services to children and youth with moderate or severe disabilities and other special needs. This mapping data represents the service area boundaries of the 21 centres.

This collection represents the authoritative watershed boundaries for Ontario. The data is based on a framework similar to the Atlas of Canada Fundamental Drainage Areas and the United States Watershed Boundary Dataset, however it adopts a more stringent scientific approach to watershed...

The Ontario Digital Surface Model (Imagery-Derived) is a raster elevation product that was generated from the elevation point clouds created via pixel-correlation from aerial photography. A DSM is the highest reflective surface of features captured by the sensor. This surface is also referred to...

The dataset contains line features which define trails that are used for: * hiking * backpacking * biking * horseback riding * cross-country skiing * snowmobiling * access to campgrounds